Fijador de roscas LIQUI MOLY media resistencia - Bote 10g

Prevents screw connections from working loose. Resists loosening due to vibration. With a wide operating temperature range of -60 °C to +150 °C. Fast and reliable hardening. Can be used on oiled surfaces. Seals threads, prevents leaks and has good chemical resistance.

Used for all commonly used screw and nut sizes and all grades.

Applic­a­tion

Apply uniformly to bolts and nuts. The paste cures in the absence of air (anaerobic).

One must differentiate between active and passive materials during the curing time. Active materials generally refer to metals with a high iron or copper content (e.g. iron, steel, copper, brass, bronze). Active materials ensure rapid curing. Passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics only cure very slowly.

Other inform­a­tion

Due to the anaerobic properties, there must always be enough air in the bottle. Otherwise the adhesive could harden prematurely. The bottle should therefore only be filled up to about 1/3. However, the quantity always corresponds to the content indicated on the container.

Features

• Resistant to stresses and vibrations
• Can be used on oily surfaces
• Adheres well to vertical surfaces
• Prevents leaks
• Curing without oxygen (anaerobic)
• Good chemical resistance to petrol, oil, water/glycol, brake fluid